Відео

Air filters and intakes do not ad power lol. Factory set-up will support alot more than youl every throw at it unless you put a turbo on and another 75 hp or more. Tuning the compter, adding camshaft, and increasing compression will ad power

Cabin noise comparison between the borla and fake engine noise at high rpm?

hi Justin, when the smaller lower bolt is moved to the top, it's has free play. Is it ok? will it move if hit potholes?

Thats thebperfect spot for a egt on that exhaust system. A little planning goes a long way drilling and tapping with that out of the car is the easiest best way. That pipe is thin did the threads hold up for you?

so if someone can develop an aftermarket dip stick or mod to gauge where the 1/2 quart , 1 quart plus fill marks are, this would be a good intermediate until an oil pan solution or better is developed.

Good advice about the jack stands! Great video.

Great video. It helped me out a lot

I loosened the hub bolts as described in the video but the hub did not seem to want to move in any way. I tried yanking on it pretty hard and even tapping it lightly with the hammer but it didn't move at all. Is there any trick to get the hub to move forward so that I can slip the 2.5 lugs in?

What was the stock manifold prior to the old header?

Hey Justin, a question-two about Eibach springs you installed a year ago: Did they "destroy" your OEM dumpers? How many miles have you made with them so far?

great video - I think I have 3 seized studs on rear drivers side, effing tire shop that repaired a punctured tire likely over tightened the lugs. Assuming I can somehow get the lugs off, will this method work with stock studs? I guess it might be even easier?

Talk about a thick bead of sealant. Might as well do this job again

Has it been squeaking for you?

My Spal fan came with that small harness already attached and sealed into the fan, and also didn't come with anything else to plug it into if I were to cut it out. Yours came with everything you needed?

What size tire were you running here?

Did you get a better mpg ?

Why add friction modifier with the oil?

How are you going to put the oil in when it’s time for oil change

The digital sound actually sounds really cool if you ask me. Sounds better than most aftermarket exhausts. The only issue for me is that its loud. Would sound better if it was quieter. I dont like loud exhausts personally. Its annoying after a few weeks and the power gain is usually minimal.

thanks a load. im glad you make this video

How did the aftermarket heater core hold up?

Sounds so much better!

Did he say seven dot three?

Hi, thanks for the video. May I as why you went with a thinner bar in the rear? From what I've seen, most guys go aftermarket in the rear as well so I am curious to know why you did that.

At 140 miles per hour mine exactly after following your video came off in one side and tremendous feeling when I hear the flapping noise.

Thank you for sharing the videos.

I did and dealer wants to charge $450.00 ??? For doing it 🤬🤬🤬

What's the air filter replacement part No# or a link to purchase it. I have the black ver. From previous owner

What are those stands? I want those

Excellent product!

A lot of people say that draining the fuel bowl is unnecessary and that it’s better to let the new filter soak up fuel during the install process I’m not sure who to believe but I do know you don’t wanna do this with a hot engine. It’s a stinky game of hot potato.

What is the other relay in front of the glow plug relay?

awesome setup just a quick one, any rub to the front or rear?

Great vid. I’m going to put one on my 7.3 excursion before summer boat towing

Great video, informative I'm lowering my son's brz tomorrow so it was great to watch and see exactly what I'm getting into .

Brilliant explanation and video thank you

Hi Justin, what’s your take on people slamming on big brake kits on the twins? Have heard of owners swapping back to stock brake system with pads + fluids Realistically what you have replaced in this video should be plenty for a lapping day ya?

Cheers!!! ❤ my 2002 is loving the love, man.

Which exact color is this?

Great vid, thank you. Am trying to decide between this cooler and a mishimoto cooler. I know the mishimoto is probably better for overall cooling but I’m only daily driving my 86. At least I know know how to install this one! Thanks

NICE! I GOT MY TRUENO GR86 WITH THE GR PERFORMANCE EXHAUST. NO DRONING. AND JUST AS LOUD AS IT NEEDS TO BE. FEELS REAL GOOD TOO. TAKUMI SENT ME. NAMASTE 🙏🏽 FROM BROOKLYN.

Is there a drain inside that catches coolant and is drained thro the engine bay. I have a leak and it sticks inside the engine bay by the Heater core area .

Nice review! I am planning to get this exhaust next week, but want to know how bad is the drone fist ? My set up is UEL catless header and OEM OP+FP. Thanks!!

does the AN fitting need to be at the galley port? my turbo oil line is coming from there. should i move my turbo oil line from the cam gear area and get a verus cam plate?

This honestly helped so much thank you for making everything simple. Now I will definitely get those tools for the wheel studs and For the new Extended wheel studs.

What a video, great job!! Actually might be my favorite e36 diy mechanic UA-camr. Thx!

Great product. I use the ball valve. I don't see any benefit to the pressure switch either. The system works way better when it's seeing engine oil pressure the entire time. It can then respond to small changes of oil pressure. The oil pressure is way more even like that.

That’s extremely disappointing, I’m wanting to upgrade mine to a 4” exhaust and was hoping for a much louder sound

I always put double 😅😅

I tried sound racer an few years ago but it didn't work. I personally prefer the Shelby Mustang sound.